—SETUP GUIDE

WooCommerce: order tracking

Connect order tracking with “approve from store”, without copying keys.

Time 5 min Steps 5 Read 4 min read Setup
01 Open a new order source02 Enter the store address03 Approve in the store panel04 Test the connection05 (Optional) connect with a key

Step 1 · Open a new order source · 1 min

Where to click: Left menu → Order sources → New source → Platform = WooCommerce.

What to enter: Select the platform. Approve from store (recommended) is the default connection method. If you prefer, you can choose Connect with a key; the help text reads "Without copying keys: you approve access in your own store panel, and the keys are sent through a secure callback."

What you should see: The Approve from store heading with a Store approval badge next to it.

If you get stuck: For the key method, the help text "Generate a Consumer Key/Secret in your WooCommerce panel and paste it here." appears; if you do not have a key, choose Approve from store.

Step 2 · Enter the store address · 1 min

Where to click: The Store address field → Connect store.

What to enter: https://mystore.com — start with https://; it must NOT end with /wp-json. If you wish, enter a Source label (optional) (e.g. Main store).

Explanation: "Enter the store address; the approval page opens in a new tab. You do not need to copy keys." The info box "How does approval work?" says: "After you press Connect store, an approval page opens in your store panel. When you approve access, the keys are sent directly from the store to YanıtLabs; you do not copy them."

What you should see: The Waiting for approval screen and the text "Approve access on the page that opened in your store panel. You can return to this page after approving."

If you get stuck: For "Store address is required. Example: https://mystore.com", enter the address; if "Could not start the store connection." appears, try again.

Step 3 · Approve in your store panel · 2 min

Where to click: The approval page that opened in your store panel → allow access.

What to enter: This step is done in your store panel. If a new tab did not open, the panel shows the warning "A new tab may not have opened" and the text "Your browser may have blocked the pop-up. You can open the approval page manually by clicking the link below."; click the Approval link. The approval link is valid for {N} minutes (default 30 minutes).

What you should see: After approving, return to the panel and press I approved, refresh the list; the Checked message appears: "The list has been refreshed. If the approval is not visible yet, complete the approval in your store panel and try again in a few seconds."

If you get stuck: If "Approval expired" appears, the link no longer works; you will see "An expired link does not work in the store. Create a new link and restart the approval." Press Create new link. Until the source is approved, the list refreshes automatically every 5 seconds. Cancelling does not delete the source: it stays in the list as "Waiting for approval", and you can remove it there.

Step 4 · Verify the connection · 1 min

Where to click: The Order sources list.

What to enter: Nothing on this step.

What you should see: "The store connection was approved and verified. The source is active; the latest test result appears in the list." and the "Store connection established" notification at the top. If you returned to the panel with ?wc=ok, you see "You returned from store approval" and "The connection appears within a few seconds; the list refreshes automatically in the meantime."

If you get stuck: If the approval is not visible in the list, wait a few seconds and press I approved, refresh the list again.

Step 5 · (Optional) Connect with a key

Where to click: Connection method → Connect with a key.

What to enter: Store address (https://mystore.com — must not end with /wp-json), Authentication method (Automatic (https→Basic, http→OAuth1) / Basic (HTTPS only) / OAuth 1.0a (http and https)), Consumer Key and Consumer Secret.

What you should see: The source added to the list as active.

If you get stuck: Keys are generated in your WooCommerce panel. The Consumer Secret is not shown again; save it.

If you get stuck

Message you see What it means / what to do
Store address is required. Example: https://mystore.com Enter the address with https://; it must not end with /wp-json.
Could not start the store connection. Try again; check your store address.
A new tab may not have opened Turn off the pop-up blocker or click the Approval link.
Approval expired / An expired link does not work in the store… Press Create new link and restart the approval.
Approval could not be verified. Complete the approval in your store panel and try again.
Mismatched approval request. Restart the approval from the panel.
Order source not found. Remove the source and add it again.
The list is not refreshing The list refreshes every 5 seconds until the source is approved; wait a few seconds.

Checklist

  • Open a new order source
  • Enter the store address
  • Approve in the store panel
  • Test the connection
  • (Optional) connect with a key

The source of this guide had 2 screenshots; they were not moved to the new site. The text is preserved; images will be added in a separate step.

+RELATED POSTS

Posts on this topic

Posts from the same topic cluster that complete this page. Blog archive.

Let’s set it up together.

Try free for 14 days, no credit card. Setup support included; cancel anytime.

Call Start 14-day trial